Non-Metallic Air Operated Double Diaphragm Pump
Model DMP 1"
Applications:
drum and small tank transfer, pickling solutions, chemical feed, etc. Features:
- Absolutely lube-free and non stalling operation
- Optional with Max-Pass- valve system
- Can safely run dry
- Self-priming dry or wet
- Centre block made of corrosion-free plastic
- Few, easily accessible construction parts
- Flow rate up to 156 l/min
Max-Pass compatible
Types:
- DMP 1" PP for neutral and aggressive liquids
- DMP 1" Kynar® for highly aggressive liquids
Benefit:
- No risk of pump failure due to to poor lubrication
- No contaminating of the environment or of the product itself by oil vapour
- Gentle pumping of liquids and pastes
- Also for viscous liquids and large solid containing fluids (Max-Pass)
- Increased suction capability of the pump (Max-Pass)
- Greater freedom of installation ot the pump (Max-Pass)
- Possible air leakage arising at connections or in case of diaphragm rupture does not harm the air system
- Easy maintenance without special tools
|
Technical:
|
DMP 1" PP |
DMP 1" Kynar® |
| Housing: |
Polyropylene |
Kynar® |
| Diaphragms: |
Geolast®,
Santoprene®,
Teflon®,
Viton® |
Teflon®,
Santoprene®,
Viton® |
| Valve ball:
|
Geolast®,
Santoprene®,
Teflon®,
Viton® |
Teflon®,
Viton® |
| Seals:
|
Geolast®,
Santoprene®,
Teflon®,
Viton® |
Teflon®,
Viton® |
| Valve seat:
|
Polypropylene |
Kynar® |
| Flow rate:
|
max. 156 l/min |
max. 156 l/min |
Suction lift:
with Max-Pass
dry
Teflon®-version |
5,5 m
4,5 m
3 m |
5,5 m
4,5 m
3 m |
| Operating pressure: |
max. 8 bar |
max. 8 bar |
| Temperature:
|
max. 66°C |
max. 93°C |
Solids handling:
with Max-Pass |
max. 6.4 mm
max. 19 mm |
max. 6,4 mm
max. 19 mm |
| Suction: |
Flange DIN DN 25 PN 10
ANSI B16,5 1" 150 PSI |
Flange DIN DN 25 PN 10
ANSI B16,5 1" 150 PSI |
| Discharge:
|
Flange DIN DN 25 PN 10
ANSI B16,5 1" 150 PSI |
Flange DIN DN 25 PN 10
ANSI B16,5 1" 150 PSI |
|
|
Metallic Air Operated Double Diaphragm Pump
Model DMP 1"
Applications:
drum and small tank transfer, pickling solutions, chemical feed, etc.
Features:
- Absolutely lube-free and non stalling operation
- Can safely run dry
- Self-priming dry or wet
- Centre block made of corrosion-free plastic
- Few, easily accessible construction parts
- Flow rate up to 156 l/min
- Explosion-proof version in compliance with ATEX
- Directive 94/9/EC, category 2
Types:
- DMP 1" Aluminium for neutral and inflammable liquids
- DMP 1" Stainless steel for neutral, aggressive and highly inflammable liquids
Benefit:
- No risk of pump failure due to to poor lubrication
- No contaminating of the environment or of the product itself by oil vapour
- Gentle pumping of liquids and pastes
- Flow rate and pressure can be regulated continuously
- No dynamic seals
- Possible air leakage arising at connections or in case of diaphragm rupture does not harm the air system
- Easy maintenance without special tools
|
Technical:
|
DMP 1" Aluminium |
DMP 1" Stainless steel |
| Housing: |
Aluminium |
Stainless steel (1.4404) |
| Diaphragms: |
Geolast®,
Teflon®,
Santoprene®,
Viton® |
Geolast®,
Teflon®,
Santoprene®,
Viton® |
| Valve ball:
|
Geolast®,
Teflon®,
Santoprene®,
Viton® |
Geolast®,
Teflon®,
Santoprene®,
Viton® |
| Seals:
|
Geolast®,
Teflon®,
Santoprene®,
Viton® |
Geolast®,
Teflon®,
Santoprene®,
Viton® |
| Valve seat:
|
Polypropylene,
Nylon |
Stainless steel |
| Flow rate:
|
max. 156 l/min |
max. 156 l/min |
Suction lift:
dry
Teflon®-version |
4,5 m
3 m |
4,5 m
3 m |
| Operating pressure: |
max. 8 bar |
max. 8 bar |
| Temperature:
|
max. 93°C |
max. 93°C |
| Solids handling: |
max. 6,4 mm |
max. 6,4 mm |
| Suction: |
1" BSP female |
1" BSP female |
| Discharge:
|
1" BSP female |
1" BSP female |
|